Industrial Power Supply 225W
- 4 x 2 x 1 Inches Form factor
- 225 Watts with Forced Air Cooling
- Hight efficiency upto 94%
- -40 to 70 °C degree operating temperature*
- 12V / 0.5A Fan Output, Thermal Shut-down protection
- 3.37m Hours, Telcordia -SR332-issue 3 MTBF
- Standby Power < 0.5W
Detailed description
| Electrical performance | |
|---|---|
| Input voltage | 85-264 VAC/390 VDC, Universal (Derate from 100% at 100V AC to 95% at 85V AC) |
| Input frequency | 47-63 Hz |
| Input current | 115 VAC: 2.2 A max. 230 VAC: 1.1 A max. |
| No load power | less than 0.5W typical |
| Surge current | 115 VAC – 25 A, 230 VAC – 45 A, 264 VAC – 75 A |
| Leakage current | 300 uA Typical, (N.A. For Class II Option) Touch current <100uA |
| Efficiency | 94%(48V,58V),91%(24V,30V),90%(12V,15V) |
| Hold-up Time | at 225W:10 ms ; 110W: 16 ms |
| Power Factor | exceeds 0.95 with Full Load |
| Output power | 225W with 13 CFM, upto 120W Convection |
| Adjustable output voltage | +/-0.5% |
| Voltage regulation rate | +/-0.5% |
| Transient Response | 25% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50Hz=4% ,recovery time <5 ms |
| Rise time | 55ms typical |
| Setpoint deviation | +/-1% |
| Overvoltage protection | >110% |
| Overvoltage protection | 110 to 140% |
| Short circuit protection | Hiccup mode |
| Switching frequency | PFC – 70 to 130 KHz ,PWM – 50-80 KHz |
| Operating temperature | -40 to +70°C |
| Storage temperature | -40 to +85°C |
| Relative humidity | 5% to 95% (non-condensing) |
| Altitude | Operating: 16,000 ft.; Nonoperating: 40,000 ft. |
| MTBF Life | 3.37m Hours, Telcordia -SR332-issue 3 |
| Insulation Voltage | Input to Output – 3000V AC for ITE application Input to GND - 1500 VAC (Not Applicable For Class II Option) |
| Cooling | 225W with 13 CFM forced air cooling 6 (refer Mechanical Drawing) up to 120 W with natural convection cooling 6 (refer Derating Curve |
| model | description | Voltage | Max. Load (Convection) (112.5W) | Max.Load (Convection) (120W) | Max. Load (13 CFM) | Min. Load? | Ripple |
|---|---|---|---|---|---|---|---|
| FSP225-1K20 | with Screw Terminal | 12 V | 9.37A | 10.0A | 18.75A | 0.0 A | 1% |
| FSP225-1K21 | with Molex Connector | 12 V | 9.37A | 10.0A | 18.75A | 0.0 A | 1% |
| FSP225-1K30 | with Screw Terminal | 15 V | 7.5A | 8.0A | 15A | 0.0 A | 1% |
| FSP225-1K31 | with Molex Connector | 15 V | 7.5A | 8.0A | 15A | 0.0 A | 1% |
| FSP225-1K40 | with Screw Terminal | 24 V | 4.68A | 5.0A | 9.37A | 0.0 A | 1% |
| FSP225-1K41 | with Molex Connector | 24 V | 4.68A | 5.0A | 9.37A | 0.0 A | 1% |
| FSP225-1K80 | with Screw Terminal | 48 V | 2.34A | 2.5A | 4.68A | 0.0 A | 1% |
| FSP225-1K81 | with Molex Connector | 48 V | 2.34A | 2.5A | 4.68A | 0.0 A | 1% |
| FSP225-1K50 | with Screw Terminal | 30 V | 3.75A | 4.0A | 7.5A | 0.0 A | 1% |
| FSP225-1K51 | with Molex Connector | 30 V | 3.75A | 4.0A | 7.5A | 0.0 A | 1% |
| FSP225-1K70 | with Screw Terminal | 58 V | 1.94A | 2.07A | 3.88A | 0.0 A | 1% |
| FSP225-1K71 | with Molex Connector | 58 V | 1.94A | 2.07A | 3.88A | 0.0 A | 1% |
| FSP225-CK | Metal enclosure accessories package | ||||||
NOTES
- Ripple is peak to peak with 20 MHz bandwidth and 10 µF (Tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
- Class II means without input Earth pin.
- Combined output power of main output, fan supply shall not exceed max. Power rating.
- Fan supply output voltage tolerance including set point accuracy, line and load regulation is +/-10% and Ripple and noise is less than 10%.
- Specifications are for nominal input voltage, 25°C unless otherwise stated.
- 225W with 13CFM forced air cooling and 120W with natural convection cooling at 100 to 264VAC.
- -40 to 0°C startup is guaranteed with spec deviation in output ripple and voltage regulation.
Datasheet
Industrial 225W