Detailed description

Electrical performance
Input voltage	85-264 VAC/390 VDC 4 , Universal (see derating under output power)
Input frequency	47-63 Hz
Input current	115V AC: 1.2A (max.), 230V AC: 0.65A (max.)
No load power	less than 0.3W typical
Surge current	115 VAC – 25 A, 230 VAC – 45 A, 264 VAC – 75 A
Leakage Current	300 uA Typical, (N.A. For Class II Option) Touch current <100uA
Efficiency	93%(48V,58V),91%(24V,30V),90%(12V,15V)
Maintenance time	>10 ms typical
Power Factor	exceeds 0.95 with Full Load, Active PFC
Output power	Forced cooling : 120W with 300LFM (refer mechanical dimension) Convection cooling : 100W (for input 100-264 VAC) (de-rate linearly to 80W @ 85VAC)
Adjustable output voltage	+/-3%
Voltage regulation rate	+/-0.5%
Load regulation	+/-1%
Transient response	25% step load change, at 0.1A/uS slew rate, 50% duty cycle, 50Hz=4% ,recovery time < 5 ms
Rise time	55ms typical
Setpoint deviation	+/-1%
Overvoltage protection	>110%
Overvoltage protection	110 to 140%, Latch type (AC recycling required)
Short circuit protection	Hiccup mode
Switching frequency	60 KHz typical
Operating temperature	-40 to +70°C
Storage temperature	-40 to +85°C
Relative humidity	5% to 95% (noncondensing)
Altitude	Operating: 16,000 ft.; Nonoperating: 40,000 ft.
MTBF Life	>3.00m Hours, Telcordia-SR332-issue 3
Insulation Voltage	Input to Output – 3000V AC for ITE application

Model	Description	Voltage	Maximum load (Convection)	Max. Load ( 300 LFM )	Maximum load	Ripple
FSP120-1K20	with Screw Terminal	12 V	8.33A	10.0A	0.0 A	1%
FSP120-1K21	with Molex Header	12 V	8.33A	10.0A	0.0 A	1%
FSP120-1K30	with Screw Terminal	15 V	6.66A	8.0A	0.0 A	1%
FSP120-1K31	with Molex Header	15 V	6.66A	8.0A	0.0 A	1%
FSP120-1K40	with Screw Terminal	24 V	4.16A	5.0A	0.0 A	1%
FSP120-1K41	with Molex Header	24 V	4.16A	5.0A	0.0 A	1%
FSP120-1K80	with Screw Terminal	48 V	2.08A	2.5A	0.0 A	1%
FSP120-1K81	with Molex Header	48 V	2.08A	2.5A	0.0 A	1%
FSP120-1K50	with Screw Terminal	30 V	3.33A	4A	0.0 A	1%
FSP120-1K51	with Molex Header	30 V	3.33A	4A	0.0 A	1%
FSP120-1K70	Screw terminal	58 V	1.72A	2.07A	0.0 A	1%
FSP120-1K71	With Molex connector	58 V	1.72A	2.07A	0.0 A	1%
FSP120-CK	metal cover kit accessory

Note

1. Ripple voltage is peak-to-peak, at a bandwidth of 20MHz, the output is connected in parallel with 10μF bile capacitance and a 0.1μF capacitor, tested at rated input voltage and output load range;
2. Electrical performance is only for nominal input voltage and ambient temperature of 25°C, unless otherwise stated;
3. – 40 °C 0 °C can guarantee start-up, but the output ripple voltage and voltage adjustment rate will be different
4. Feature is not certified

Mechanical Specifications
Input Connector (J1) Option 1	Molex: 39357-0003 Tyco: 2-1776112-3	Option 2		Molex: 1722861103 (Mating conn: Molex 1722561003)
DC Output Connector (J2) Option 1	Molex: 39357-0004 Tyco: 2-1776112-4	Option 2		Molex: 1722861104 (Mating conn: Molex 1722561004)
Size	3 x 2 x 1.18inch (76.2 x 50.8 x 30.1 mm)
Weight	150g
EMC
CE Mark	Complies with LVD Directive
Conducted Emissions	EN55022 - B, CISPR22 - B, FCC PART15 - B
Static Discharge	EN61000-4-2, Level-3
RF Field Susceptibility	EN61000-4-3, Level-3
Fast Transients/Bursts	EN61000-4-4, Level-3
Radiated Emissions	Level A radiated, Level B radiated with external core
Surge Susceptibility	EN61000-4-5, Level-3
Harmonic Current	EN61000-3-2, Class D
Safety
Safety Standard(s)	IEC/EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013, UL 60950-1, 2nd Edition, CAN/CSA C22.2 No. 60950-1-07, 2nd Edition
Approval Agency	UL, C-UL
Safety File Number(s)	UL: E135662
CCC Standard(s)	GB9254-2008；GB4943.1-2011；GB17625.1-2012  CNCA-C09-01：2014
CQC File Number(s)	2016010907856054
Environmental protection
RoHS Version	FSP075 Series Meets European RoHS Requirements (Directive 2011/65/EU)

Datasheet
Industrial 120W